The stainless steel plate has a smooth surface, high plasticity, toughness and mechanical strength, and is resistant to corrosion by acids, alkaline gases, solutions and other media.
It is an alloy steel that does not rust easily, but not absolutely rust-free. Stainless steel plate refers to a steel plate that is resistant to corrosion by weak media such as atmosphere, steam
and water, while acid-resistant steel plate refers to a steel plate that is resistant to corrosion by chemically corrosive media such as acid, alkali, and salt. Stainless steel plate has been around
for more than a century since it came out at the beginning of the 20th century.
Wide range of uses Typical uses: pulp and paper equipment heat exchangers, mechanical equipment, dyeing equipment, film processing equipment, pipelines, exterior materials for buildings
in coastal areas, etc.
Corrosion resistance
Stainless steel has a similar resistance to general corrosion as the unstable Nichrome 304. Prolonged heating in the temperature range of chromium carbide degrees may affect Alloys 321
and 347 in harsh corrosive media. Mainly used in high temperature applications, which require strong resistance to sensitization of the material to prevent intergranular corrosion at
lower temperatures.
High temperature oxidation resistance
Stainless steel plates are all resistant to high temperature oxidation, however, the oxidation rate will be affected by inherent factors such as exposure environment and product form.
International stainless steel marking method
The American Iron and Steel Institute uses three digits to designate various standard grades of malleable stainless steel. in:
①Austenitic stainless steel is marked with numbers of 200 and 300 series.
② Ferritic and martensitic stainless steels are represented by numbers in the 400 series. For example, some of the more common austenitic stainless steels are designated 201, 304, 316 and 310.
③ Ferritic stainless steel is marked with 430 and 446, and martensitic stainless steel is marked with 410, 420 and 440C, duplex (austenite-ferrite).
④Stainless steel, precipitation hardening stainless steel and high alloys with iron content less than 50% are usually named by patent names or trademarks.
Steel is an alloy of iron and carbon. Stainless steels are steels containing at least 10.5% chromium, less than 1.2% carbon and other alloying elements. Stainless steel’s corrosion resistance and
mechanical properties can be further enhanced by adding other elements, such as nickel, molybdenum, titanium, niobium, manganese, etc.
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
N |
Cu |
|
201 |
≤0.15 |
≤0.75 |
5.5~7.5 |
≤0.060 |
≤0.03 |
16.00~18.00 |
3.5~5.5 |
- |
- |
0.08 |
|
202 |
≤0.15 |
≤1.00 |
7.5~10.00 |
≤0.060 |
≤0.03 |
17.00~19.00 |
4.0~6.0 |
- |
≤0.25 |
|
|
301 |
≤0.15 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
16.00~18.00 |
6.00~8.00 |
- |
||
|
302 |
≤0.15 |
≤1.00 |
≤2.00 |
≤0.035 |
≤0.03 |
17.00~19.00 |
8.00~10.00 |
- |
||
|
304 |
≤0.07 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
18.00~20.00 |
8.00~10.50 |
- |
||
|
304L |
≤0.030 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
18.00~20.00 |
9.00~13.00 |
- |
||
|
310S |
≤0.08 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
24.00~26.00 |
19.00~22.00 |
- |
||
|
316 |
≤0.08 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
16.00~18.00 |
10.00~14.00 |
2.00~3.00 |
||
|
316L |
≤0.03 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
16.00~18.00 |
12.00~15.00 |
2.00~3.00 |
||
|
321 |
≤0.08 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
17.00~19.00 |
9.00~13.00 |
- |
||
|
430 |
≤0.12 |
≤0.75 |
≤1.00 |
≤0.040 |
≤0.03 |
16.00~18.00 |
- |
|||
|
2205 |
≤0.03 |
≤1.00 |
≤2.00 |
≤0.030 |
≤0.015 |
22.00~23.00 |
4.5~6.5 |
2.5~3.5 |
||
|
2507 |
≤0.03 |
≤0.08 |
≤1.20 |
≤0.035 |
≤0.015 |
24.00~26.00 |
6.00~8.00 |
3.0~5.0 |
||
|
904L |
≤0.02 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.035 |
19.00~23.00 |
23.00~28.00 |
4.0~5.0 |
1.0~2.0 |
|
|
INCONEL 028 |
≤0.03 |
≤1.00 |
≤2.50 |
≤0.030 |
≤0.030 |
≤28.0 |
≤34.0 |
≤4.0 |
≤1.4 |
|
|
MONEL 400 |
≤0.30 |
≤0.5 |
≤2.00 |
- |
≤0.024 |
- |
≥63.0 |
- |
≤34.0 |
|
|
INCONEL 800 |
≤0.10 |
≤1.00 |
≤1.50 |
- |
≤0.015 |
≤23.0 |
≤35 |
4.0~5.0 |
- |
≤0.75 |
FAQ：
Q: What kind of work does your company do?
A: We are a business steel industry and trade. We mainly produces stainless steel plate/pipe/coil/round bars etc.
Q: What are the advantages of your company?
A: (1): Prime quality and Competitive price.
(2): Excellent experiences with after-sale service.
(3): Every process will be checked by responsible QC which insures every product's quality.
(4): Professional packing teams which keep every packing safely.
(5): Samples can be provided as your requirements.
Q: What is your terms of payment ?
A: Can be negotiated by both parties. If you have another question, pls feel free to contact us as below
Q: What about your price?
A: Our price is very competitive.
Pls feel free to contact us if you are interested in our products.
Q: How long is your delivery time?
A: Stock steel/Steel for simple cutting/Small amount of general standard steel: about 5-20 days for delivery; Custom steel/bulk steel: about 15-30 days for delivery. Contact us for specific delivery
times.
