Product Description
International stainless steel marking method
The American Iron and Steel Institute uses three digits to designate various standard grades of malleable stainless steel. in:
①Austenitic stainless steel is marked with numbers of 200 and 300 series.
② Ferritic and martensitic stainless steels are represented by numbers in the 400 series. For example, some of the more common austenitic stainless steels are designated 201, 304,
316 and 310.
③ Ferritic stainless steel is marked with 430 and 446, and martensitic stainless steel is marked with 410, 420 and 440C, duplex (austenite-ferrite).
④Stainless steel, precipitation hardening stainless steel and high alloys with iron content less than 50% are usually named by patent
Steel is an alloy of iron and carbon. Stainless steels are steels containing at least 10.5% chromium, less than 1.2% carbon and other alloying elements. Stainless steel’s corrosion resistance and
mechanical properties can be further enhanced by adding other elements, such as nickel, molybdenum, titanium, niobium, manganese, etc.
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
N |
Cu |
201 |
≤0.15 |
≤0.75 |
5.5~7.5 |
≤0.060 |
≤0.03 |
16.00~18.00 |
3.5~5.5 |
- |
- |
0.08 |
202 |
≤0.15 |
≤1.00 |
7.5~10.00 |
≤0.060 |
≤0.03 |
17.00~19.00 |
4.0~6.0 |
- |
≤0.25 |
|
301 |
≤0.15 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
16.00~18.00 |
6.00~8.00 |
- |
||
302 |
≤0.15 |
≤1.00 |
≤2.00 |
≤0.035 |
≤0.03 |
17.00~19.00 |
8.00~10.00 |
- |
||
304 |
≤0.07 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
18.00~20.00 |
8.00~10.50 |
- |
||
304L |
≤0.030 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
18.00~20.00 |
9.00~13.00 |
- |
||
310S |
≤0.08 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
24.00~26.00 |
19.00~22.00 |
- |
||
316 |
≤0.08 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
16.00~18.00 |
10.00~14.00 |
2.00~3.00 |
||
316L |
≤0.03 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
16.00~18.00 |
12.00~15.00 |
2.00~3.00 |
||
321 |
≤0.08 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.03 |
17.00~19.00 |
9.00~13.00 |
- |
||
430 |
≤0.12 |
≤0.75 |
≤1.00 |
≤0.040 |
≤0.03 |
16.00~18.00 |
- |
|||
2205 |
≤0.03 |
≤1.00 |
≤2.00 |
≤0.030 |
≤0.015 |
22.00~23.00 |
4.5~6.5 |
2.5~3.5 |
||
2507 |
≤0.03 |
≤0.08 |
≤1.20 |
≤0.035 |
≤0.015 |
24.00~26.00 |
6.00~8.00 |
3.0~5.0 |
||
904L |
≤0.02 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.035 |
19.00~23.00 |
23.00~28.00 |
4.0~5.0 |
1.0~2.0 |
|
INCONEL 028 |
≤0.03 |
≤1.00 |
≤2.50 |
≤0.030 |
≤0.030 |
≤28.0 |
≤34.0 |
≤4.0 |
≤1.4 |
|
MONEL 400 |
≤0.30 |
≤0.5 |
≤2.00 |
- |
≤0.024 |
- |
≥63.0 |
- |
≤34.0 |
|
INCONEL 800 |
≤0.10 |
≤1.00 |
≤1.50 |
- |
≤0.015 |
≤23.0 |
≤35 |
4.0~5.0 |
- |
≤0.75 |
Standard Specification
Thickness | 0.01mm-100mm | ||||||
Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc | ||||||
Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc | ||||||
Surface | 2B, 2D, BA, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc | ||||||
Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) | ||||||
Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
Surface finish |
Thickness |
Size |
Characteristics |
Application |
NO. 1 |
3-100mm |
Width: 1500/1800/2000mm; |
Finished by hot-rolling, annealing and pickling, characterized by white pickled surface |
Chemical industry equipment, Industrial tanks |
2B |
0.2-6.0mm |
Width: 1000/1219/1500/1800/2000mm; |
Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface |
General Application Medical Instruments,Tableware |
No. BA |
0.2-3.0mm |
Width: 1000mm,1219mm; |
Bright heat treatment after cold rolling |
Kitchen utensil, kitchen ware,architectural purpose |
NO.4 Satin |
0.3-8.0mm |
Width: 1000/1219/1500mm; |
Polishing with No. 150 to No.320 mesh abrasivesThe most popular finishes |
Milk & Food processing acilities, Hospital Equipment, Bath-tub |
8K Mirror |
0.3-10mm |
Width: 1000/1219/1500mm; |
A mirror-like reflective surface by polishing with finer abrasives over 800 mesh |
Reflector, Mirror, Interior-Exterior decoration forbuilding |
HL(Hairline) |
0.3-8mm |
Width: 1000/1219/1500mm; |
Finished by continuous linear polishing |
Architectural purposes, escalators, kitchen ware vehicles |
FAQ:
Q: What kind of work does your company do?
A: We are a business steel industry and trade. We mainly produces stainless steel plate/pipe/coil/round bars etc.
Q: What are the advantages of your company?
A: (1): Prime quality and Competitive price.
(2): Excellent experiences with after-sale service.
(3): Every process will be checked by responsible QC which insures every product's quality.
(4): Professional packing teams which keep every packing safely.
(5): Samples can be provided as your requirements.
Q: What is your terms of payment ?
A: Can be negotiated by both parties. If you have another question, pls feel free to contact us as below
Q: What about your price?
A: Our price is very competitive.
Pls feel free to contact us if you are interested in our products.
Q: How long is your delivery time?
A: Stock steel/Steel for simple cutting/Small amount of general standard steel: about 5-20 days for delivery; Custom steel/bulk steel: about 15-30 days for delivery. Contact us for specific delivery
times.